Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.4120 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1850 inches single shaft
Shaft Length:
0.5550 inches single shaft
Maximum Tempurature Rise:
10.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
165.0 milliamperes
Stator Input Electrical Power Rating:
500.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
14.00
Zso Resistance In Ohms:
15.00
Zrs Resistance In Ohms:
14.00
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
40.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
70.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
8.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.8570 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2530 inches single shaft
Plus J Zro Reactance In Ohms:
67.00
Plus J Zso Reactance In Ohms:
70.00
Plus J Zrs Reactance In Ohms:
6.60
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
1.079 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Thread Size:
0.190 inches single shaft
Terminal Type And Quantity:
6 screw
Item Name:
Synchro,differential Transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
